4700LX Sugar Cane Loader 225 HP (168 KW) / 210 HP (157 KW)

4700LX_1
  • Large 1 ton grab capacity increases efficiency
  • Long reach boom to pack the cane deep down into the cart and load in 1.8 meter rows
  • Easy to use with lots of pushing power due to high HP hydrostatic drive train
  • Elevated cat walk with all around access to engine and cooling package components
  • Removable panels allow for easy access for maintenance
  • Plenty of room in cab for comfort and to limit fatigue

About This Product

ENGINE
Cummins B 6.7, Stage V / Final Tier IV electronic engine, 225 HP (168 KW) @ 2,500 RPM with 240 HP (179 KW) @ 2,200 RPM bulge, Peak torque of 700 FT-LB (1044 NM) @ 1,500 RPM
Severe dust, dry dual stage air cleaner with service indicator and pre-cleaner
Primary fuel/water separator with secondary fuel filter
Large tropical radiator and oil coolers mounted on rubber isolators, 8 fins/inch spacing and swing out ease cleaning
Reversing cooling fan to clean coolers and screens
135-gal (510-liter) steel fuel tank with lockable cap and 12-inch clean our door
Deck with handrails around entire engine, pumps, filters, coolers, and service area
Optional:
John Deere 6068HF, 210 HP (157 KW) @ 2,400 RPM, 568 FT-LB (771 NM) @ 1,400 RPM mechanical engine

GROUND DRIVE
Two heavy duty variable displacement hydrostatic pumps and (4) two speed heavy duty hydrostatic motors for wheel-drives
Rigid front and rear oscillating steering axle with heavy duty planetary final drives
Spring applied hydraulic release parking brakes
Infinitely variable operating speeds in forward and reverse
All four wheels are powered full time
Low speed range = 0 to 8.7 MPH/ 0 to 14 KPH
High speed range = 0 to 18.6 MPH/ 0 to 30 KPH
Independent 38-gallon tank and cooler isolates the ground drive pumps and motors from hydraulic system contamination

CANE HANDLING
Oversized, standardized, pins and bushings at cylinder and pivot points.
180-degree boom swing right and left, cushioned at both extremes
Front mounted piler bar with 2.5 in (63.50mm) adjustable mounting positions for tines
Push piler
Optional:
10 chain piler

ELECTRICAL
(2) 12-VDC, 950 CCA, 180 RC Group 31XHE heavy duty maintenance free commercial batteries
12-Volt DC, 160-AMP alternator
Four LED headlights
Two LED work lights in the rear, two per side, and one on boom
One service deck light
Strobe light
Turn signal and warning lights front and rear mounted on extendable arms

OPERATOR’S STATION
AC cab with AM/FM stereo
Fully adjustable suspension seat with armrests
Adjustable tilt steering column
Joystick controls for boom and grab
Foot pedal control for ground drive
Windshield wipers (front and sides) and mirrors
Optional:
Air suspension seat

HYDRAULIC SYSTEM
Closed center, pressure compensate, piston pump for steering, boom, and piler cylinder functions
Priority hydraulic power steering
Pressurized hydraulic tank 68-gal (257-liters)
100% filtration and 12-inch clean out door

TIRES
24.5X32, R1, 12 ply front and 18.4X26, R1, 12 ply rear optional in R2
Optional:
30.5X32, R1 or R2, 14 ply front and 23.1X26, R1 or R2, 12 ply rear
3.0 meter track spacing
Optional:
Axle spacers move tracks to 3.3, 3.5 or 3.6 meters and can be ordered with new units or added to any existing unit in the field.