69ATX 4×4 Articulated Tractor 200 HP (149 KW)

69ATX
  • Engine and transmission coolers with 8 fins per inch spacing reduce buildup of debris. Hood rolls up for easy cleaning.
  • Individual gauges and indicators simplify operation, troubleshooting, and repair.
  • Tilting platform and hood provide unmatched access to engine, cooler, and cab components. Both work via hand pump even when systems are down.
  • Hood profile provides excellent visibility.
  • Built to withstand extreme conditions, the frame accommodates multiple hitch configurations for high weight transfer, winches, and other equipment.

About This Product


ENGINE
Cummins B4.5, Stage V / Final Tier IV electronic engine, 200 HP (149 KW) @ 2,200 RPM, Peak torque of 576 FT-LB (780 NM) @ 1,500 RPM
Severe dust, dry dual stage air cleaner with service indicator and pre-cleaner
Primary fuel/water separator with secondary fuel filter
Large tropical radiator, transmission, and hydraulic oil coolers are 8 fins/inch and rubber isolator mounted
76-gal (288 liter) steel fuel tank with lockable cap and 12-inch clean out door
Manual hydraulic tilting hood allows easy cleaning of coolers and service of engine and under hood parts

TRANSMISSION
Manually controlled, converter driven 4-speed power shift with lockup in all gears
Power shift allows shifting under full engine power
Mechanical drum parking brake on output shaft
Separate cooler/system isolates transmission from hydraulic system contamination
Optional:
6 speed, converter driven, electronically controlled, powershift and automatic transmission - 6F/3R
8 speed, direct drive, electronically controlled, powershift transmission - 8F/4R
11 speed, direct drive, electronically controlled, powershift transmission - 11F/3R

AXLES
All wheels are powered
Heavy duty, planetary, dual reduction
Oscillating front axle, rigid rear axle
No spin “Detroit locker” rear differential
Internal oil bath service brakes
 
CHASSIS
Heavy duty welded frame
Articulating joint with heavy duty radial spherical bearings and large hardened pins
Dual double acting heavy duty, welded hydraulic steering cylinders with bushings
Full belly pans and front pull hook
Painted with yellow gloss finish

STANDARD EQUIPMENT
Engine oil pressure gauge and indicator
Engine coolant temperature gauge and indicator
Voltage gauge
Fuel gauge
Tachometer with hour meter
Low hydraulic oil level light / indicator
Transmission oil temperature gauge and indicator
Transmission pressure gauge and indicator
Oil filter service warning light / indicator

ELECTRICAL
(2) 12-VDC, 950 CCA, 180 RC Group 31XHE heavy duty maintenance free commercial batteries
12-Volt DC, 160-Amp alternator
Horn, reverse alarm, & master disconnect switch
Four LED headlights in hood
Two adjustable front and two rear/side LED work lights
Two LED work lights in rear bumper
Brake and indicator lights in rear bumper with warning lights top of cab (viewable front and rear)
Strobe light  

OPERATOR'S STATION
Open station with welded steel canopy top
Fully adjustable suspension seat with armrests
Adjustable tilt steering column
Manual hydraulic tilting platform
Optional:
ROPS/FOPS certified A/C cab with rear windshield wiper which tilts for transmission and hydraulic component service. Includes AM/FM radio, marine grade, with USB, AUX port and Bluetooth
Training seat
Leather, heated/ventilated, toggle link, semi-active suspension with fully adjustable air ride, backrest, lumbar, head and arm rests seat; 20-degree swivel right, 60-degree swivel left
Electric cab/hood tilt  

HYDRAULIC SYSTEM
Open center pump for brakes, steering, and implement valve
39-gal pressurized hydraulic tank with 100% filtration and 12-inch clean out door
Cable operated 2-bank implement valve
Accumulator for emergency braking 

MISC OPTIONS
Cable operated 4-bank control valves
Air compressor, tank, trailer park and service brakes vial foot & lever
7-pin electrical connector capable of multiple trailer operation
Hydraulic brake ports on rear for trailer
Heavy duty / fixed swinging drawbar
Heavy duty / fixed swinging drawbar with three hitch heights
Welded rear extension with pintle hook
Category III, 3-point hitch
PTO
Front push bumper
Fire extinguisher  

TIRES
(4) 460/85R30, R-1W
78.5″ (1.99m) track
Heavy duty, one piece rims
Optional:
(4) 18.4X30, R2, 10 PLY
(4) 18.4X34, R1, 8 PLY
(4) 460/85R34, R-1W
(4) 480/70R34, R2
(4) 18.4X38, R2, 8 PLY
(4) 23.1X26, R1, 12 PLY
(4) 23.1X26, R2, 12 PLY