7425PX Sugar Cane Planter 280 HP (209 KW)

About This Product
ENGINE
Cummins QSC 8.3, Tier III, 280 HP (209 KW) @ 2,000 RPM / 260 HP (194 KW) @ 2,200 RPM, Peak torque of 870 FT-LB (1180 NM) @ 1,500 RPM, electronic fuel injection system
Severe dust, dry, dual stage air cleaner with pre-cleaner
160-gallon fuel tank with 12 inch clean out door
Large tropical radiator, air to air, and hydraulic oil coolers
HYDROSTATIC DRIVE
Hand hydrostatic control
Dual heavy-duty, bi-directional, hydrostatic, variable displacement, axial piston pumps
Dual heavy-duty, hydrostatic, two speed motors
Charge pump filtration
Separate hydraulic oil tank and cooler isolates the sensitive and expensive hydrostatic components from the hydraulic system
HYDRAULIC SYSTEM
Open center
Vane type pump for brakes, steering, and cylinder controls
Electric over hydraulic proportional controls for all conveyors
65-gallon hydraulic tank with 100% filtration and separate oil cooler and 12 inch clean out door
45-gallon hydrostatic tank with 100% filtration and separate oil cooler and 12 inch clean out door
ELECTRICAL
12-Volt DC engine system
12-Volt DC roadway, rear backing, and warning lights
(2) 12-VDC, 950 CCA, 180 RC Group 31XHE heavy duty maintenance free commercial batteries
160 Ampere alternator
OPERATOR'S STATION
Single cab in front and rear
Air-conditioned
AM/FM stereo
Windshield wipers front and rear on front cab
Windshield wipers front, sides, and rear on rear cab
Rear view mirrors on front cab
Fully adjustable suspension seats
Optional : Air suspension seat
STANDARD EQUIPMENT
Engine oil monitoring and warning
Engine coolant monitoring and warning
Voltage monitoring
Fuel gauge and system monitoring
Tachometer with hour meter
Low hydraulic oil level buzzer/light for hydraulic and hydrostatic tanks
MISC OPTIONS
Electronic steering and mapping
TRACK SYSTEM
60,000-pound operational weight rating
Double grouser shoes
Planetary final drives
Spring applied hydraulic release parking brakes
Dynamic braking supplies by hydrostatic pump and motor
PLANTING
Dual 2.50 ton bins
Dual distribution conveyors independently controlled
Dual tool bars independent control and float position
Plow and drop box on each tool bar with covering disc at 1.5 to 1.8 meter centers on single rows or 9 foot (2.74 meter) centers with 3 foot (.91 meter) centers on dual line planted rows. Other dual line planting spacings available upon request
Two monitors for driver and two for rear operator with four cameras
Cummins QSC 8.3, Tier III, 280 HP (209 KW) @ 2,000 RPM / 260 HP (194 KW) @ 2,200 RPM, Peak torque of 870 FT-LB (1180 NM) @ 1,500 RPM, electronic fuel injection system
Severe dust, dry, dual stage air cleaner with pre-cleaner
160-gallon fuel tank with 12 inch clean out door
Large tropical radiator, air to air, and hydraulic oil coolers
HYDROSTATIC DRIVE
Hand hydrostatic control
Dual heavy-duty, bi-directional, hydrostatic, variable displacement, axial piston pumps
Dual heavy-duty, hydrostatic, two speed motors
Charge pump filtration
Separate hydraulic oil tank and cooler isolates the sensitive and expensive hydrostatic components from the hydraulic system
HYDRAULIC SYSTEM
Open center
Vane type pump for brakes, steering, and cylinder controls
Electric over hydraulic proportional controls for all conveyors
65-gallon hydraulic tank with 100% filtration and separate oil cooler and 12 inch clean out door
45-gallon hydrostatic tank with 100% filtration and separate oil cooler and 12 inch clean out door
ELECTRICAL
12-Volt DC engine system
12-Volt DC roadway, rear backing, and warning lights
(2) 12-VDC, 950 CCA, 180 RC Group 31XHE heavy duty maintenance free commercial batteries
160 Ampere alternator
OPERATOR'S STATION
Single cab in front and rear
Air-conditioned
AM/FM stereo
Windshield wipers front and rear on front cab
Windshield wipers front, sides, and rear on rear cab
Rear view mirrors on front cab
Fully adjustable suspension seats
Optional : Air suspension seat
STANDARD EQUIPMENT
Engine oil monitoring and warning
Engine coolant monitoring and warning
Voltage monitoring
Fuel gauge and system monitoring
Tachometer with hour meter
Low hydraulic oil level buzzer/light for hydraulic and hydrostatic tanks
MISC OPTIONS
Electronic steering and mapping
TRACK SYSTEM
60,000-pound operational weight rating
Double grouser shoes
Planetary final drives
Spring applied hydraulic release parking brakes
Dynamic braking supplies by hydrostatic pump and motor
PLANTING
Dual 2.50 ton bins
Dual distribution conveyors independently controlled
Dual tool bars independent control and float position
Plow and drop box on each tool bar with covering disc at 1.5 to 1.8 meter centers on single rows or 9 foot (2.74 meter) centers with 3 foot (.91 meter) centers on dual line planted rows. Other dual line planting spacings available upon request
Two monitors for driver and two for rear operator with four cameras