77WTX 4×4 Articulated Tractor 250 HP (186 KW) / 210 HP (157 KW)

77WTX
  • Engine and transmission coolers with 8 fins per inch spacing reduce buildup of debris. Hood rolls up for easy cleaning.
  • Individual gauges and indicators simplify operation, troubleshooting, and repair.
  • Tilting platform and hood provide unmatched access to engine, cooler, and cab components. Both work via hand pump even when systems are down.
  • Extreme  heavy duty upper and lower articulation joint with radial spherical bearings, oversized hardened pins, and welded cylinders with bushings.
  • Hood profile provides excellent visibility.
  • Built to withstand extreme conditions, the frame accommodates multiple hitch configurations for high weight transfer, winches, and other equipment.

About This Product

ENGINE
Cummins B6.7, Final Tier IV, Stage V electronic engine, 250 HP (186 KW) @ 2,000 RPM with 850 FT-LB (1152 NM) of torque @ 1,500 RPM
Severe dust, dry dual stage air cleaner with service indicator and pre-cleaner
Fuel/water separator with secondary fuel filter
Large tropical radiator, transmission, and hydraulic oil coolers are 8 fins/inch and rubber isolator mounted
76-gal (228 liter) steel fuel tank with lockable cap and 12-inch clean out door
Manual hydraulic tilting hood allows easy cleaning of coolers and service of engine and under hood parts
Optional:
John Deere 606HF, 210HP (157 KW) @ 2,400 RPM, 568 FT-LB (771 NM) @ 1,400 RPM Mechanical engine (export only)
 
TRANSMISSION
Manually controlled, converter driven, 4-speed power shift with lockup in all gears
Power shift allows shifting under full engine power
Mechanical drum parking brake on output shaft
Separate cooler/system isolates transmission from hydraulic system contamination
Optional:
8 speed, direct drive power shift transmission with bump shifter and inching pedal – 8F/4R
11 speed, direct drive power shift transmission with bump shifter and inching pedal – 11F/3R

AXLES
All wheels are powered
Heavy duty, dual reduction, wide flange to flange
accommodates 3-meter single or dual tire centers
Ring and pinion reduction with planetary final drives
No spin "Detroit locker" rear and limited slip front differentials
Oscillating front axle, rigid rear axle
Internal oil bath service brakes

CHASSIS
Heavy duty, welded frame
Articulating joint with heavy duty radial spherical bearings and large hardened pins
Dual double acting heavy duty welded hydraulic steering cylinders with bushings
Full belly pans and front pull hook
Painted with yellow gloss finish

STANDARD EQUIPMENT
Engine oil pressure gauge and indicator
Engine coolant temperature gauge and indicator
Voltage gauge
Fuel gauge
Tachometer with hour meter
Low hydraulic oil level light / indicator
Transmission oil temperature gauge and indicator
Transmission pressure gauge and indicator
Oil filter service warning light / indicator

ELECTRICAL
(2) 12-VDC, 950 CCA, 180 RC Group 31XHE heavy duty maintenance free commercial batteries
12-Volt DC, 160 Amp alternator
Horn, reverse alarm, & master disconnect switch
Four LED headlights in hood
Two adjustable front and two rear/side LED work lights
Two LED lights in rear bumper
Brake and indicator lights in rear bumper with warning lights top of cab (viewable front and rear)
Strobe light  

OPERATOR'S STATION
Open station with welded steel canopy top
Fully adjustable suspension seat with armrest
Adjustable tilt steering column
Manual hydraulic tilting platform
Optional:
ROPS/FOPS certified A/C cab with rear windshield wiper which tilts for transmission and hydraulic component service. Includes AM/FM radio, marine grade, with USB, AUX port and Bluetooth
Training seat
Leather, heated/ventilated, toggle link, semi-active suspension with fully adjustable air ride, backrest, lumbar, head and arm rests seat; 20-degree swivel right, 60-degree swivel left
Electric cab/hood tilt  

HYDRAULIC SYSTEM
Open center pump for brakes, steering, and implement valve
39-gal pressurized hydraulic tank with 100% filtration and 12-inch clean out door
Cable operated 2-bank implement valve
Accumulator for emergency braking  

MISC OPTIONS
Cable operated 4 bank control valves
Air compressor, tank, trailer park and service brakes via foot & lever
7-pin electrical connector capable of multiple trailer operation
Hydraulic brake ports on rear for trailer
Heavy duty fixed / swinging drawbar
Welded rear extension with pintle hook
Category III, 3-point hitch
3-point hitch draft/height control
PTO
Fifth wheel hitch
Regular or inverted 4-inch gooseneck ball
40,000-lb hydraulic winch on rear frame
Front push bumper
Fire extinguisher  

TIRES
(4) 23.1X26, R1, 12 PLY
Heavy duty one piece rims
Optional:
(4) 23.1X26, R2, 12 PLY
(4) 23.1X34, R1
(4) 23.1X34, R2, 12 PLY
(4) 710/70R38, R-1W
(4) 520/85R42, R2