79FTX 4×4 TRACTOR 280 HP (209 KW) / 275 HP (205 KW)

79FTX_1
  • Engine and transmission coolers with 8 fins per inch spacing reduce buildup of debris. Hood rolls up for easy cleaning.
  • Modular Armrest with ergonomic operator controls.
  • Tilting platform and hood provide unmatched access to engine, coolers, transmission, underhood and cab components. Both work via hand or electric pump, even when systems are down.
  • Hood profile provides excellent visibility.
  • Built to withstand extreme applications, the frame accommodates multiple hitch configurations for high weight transfer, winches, and other equipment. 

About This Product

ENGINE
Cummins B6.7,Stage V/ Final Tier IV 280 HP (209 KW) @ 2,000 RPM and 850 FT-LB (1152 NM) @ 1,500 RPM
Severe dust, dry dual stage air cleaner with service indicator and pre-cleaner
Fuel/water separator with secondary fuel filter
Large tropical radiator, transmission, and hydraulic oil coolers are 8 fins/inch and rubber isolator mounted
120-gal (454 liter) steel fuel tank with lockable cap and 12-inch clean out door
Manual hydraulic tilting hood allows easy cleaning of coolers and service of engine and under hood parts
Optional:
John Deere 6068 HF, Tier III electronic engine, 275HP (205 KW) @ 2,400 RPM.  Peak torque of 756 FT-LB (1,025 NM) @ 1,400 RPM (export only)

TRANSMISSION
Direct drive powershift transmission with bump shift and inching pedal
11 forward/3 reverse gears
Spring applied/hydraulic release driveline parking brake
Separate cooler/system isolates transmission from hydraulic system contamination

AXLES
All wheels are powered
Heavy duty, outboard planetary, dual reduction
Ring and pinion reduction with planetary final drives
Oscillating front axle, rigid rear axle
Internal oil bath service brakes
Hydraulically actuated differential locking front axle
Hydraulically actuated differential locking rear axle

CHASSIS
Heavy duty, welded frame
Double acting heavy duty welded hydraulic steering cylinder with bushings
Belly pans and front pull hook
Painted with yellow gloss finish

STANDARD EQUIPMENT
Engine oil pressure gauge and indicator
Engine coolant temperature gauge and indicator
Voltage gauge
Fuel gauge
Tachometer with hour meter
Low hydraulic oil level light / indicator
Transmission oil temperature gauge and indicator
Transmission pressure gauge and indicator
Oil filter service warning light / indicator

ELECTRICAL
(2) 12-VDC, 950 CCA, 180 RC Group 31XHE heavy duty maintenance free commercial batteries
12-Volt DC, 160-Amp alternator
Horn, reverse alarm, & master disconnect switch
Four LED headlights in hood
Two adjustable front and two rear/side LED work lights
Two LED work lights in rear bumper
Brake and indicator lights in rear bumper with warning lights top of cab view able front and rear
Strobe light
7-pin electrical connector capable of multiple trailer operation  

OPERATOR'S STATION
ROPS/FOPS certified A/C cab with rear windshield wiper which tilts for transmission and hydraulic component service. Includes AM/FM radio, marine grade, with USB, AUX port and Bluetooth
Fully adjustable suspension seat with armrest
Adjustable tilt steering column
Manual hydraulic tilting platform
12″ Touch Screen Display
Modular Armrest with ergonomic operator controls
Optional:
Leather, heated/ventilated, toggle link, semi-active suspension with fully adjustable air ride, backrest, lumbar, head and arm rests seat; 20-degree swivel right, 60-degree swivel left
Electric cab/hood tilt
Training seat  

HYDRAULIC SYSTEM
39-gal pressurized hydraulic tank with 100% filtration and 12-inch clean out door
Electric 6-bank valve with capability to change flows on the go
Accumulator for emergency braking  

MISC OPTIONS
Hydraulic brake ports on rear for trailer
Heavy duty fixed drawbar
Welded rear extension with pintle hook
Category III, 3-point hitch with float and draft assist
PTO
Front push bumper
Fire extinguisher  

TIRES
(2) 340/85R46, R2 Radials (front)
(2) 520/85R46, R2 Radials (rear)
Heavy duty, one piece rims