96ATX 4×4 Articulated Tractor 630 HP (470 KW)

96ATX
  • 4x4 Tractor, 630 HP (470 KW)
  • Multi-function electronic system monitor
  • Tilting cab provides unmatched access to powertrain and hydraulic components
  • Forward tilting hood provides unmatched access to engine coolers and other components
  • Trimble system optional

About This Product

ENGINE
Caterpillar C18, Stage V / Final Tier IV 630 HP (470 KW) @ 2,000 RPM Peak torque of 2,178 LBFT ( 2,953 NM ) @ 1,300 RPM, electronic fuel injection system
Severe dust, dry, dual stage air cleaner with service indicator pre-cleaner with automatic dust ejector
400-gal steel fuel tank with lockable cap and 12-inch clean out door
High capacity 10-micron primary fuel/water separator, with dual 2-micron secondary fuel filter
Large tropical radiator, transmission and hydraulic oil coolers are 8 fins per inch and rubber isolator mounted

TRANSMISSION
Electronically controlled, direct drive,16 speed power shift, 4 reverse
Multi disc, oil immersed, spring applied/hydraulic release, driveline parking brake
Separate cooler/system isolates transmission from hydraulic system contamination

AXLES
All wheels are powered
Heavy duty, planetary, dual reduction axles
Ring and pinion reduction with planetary final drives
No spin "Detroit locker" rear and limited slip front differentials
Rear oscillating and front rigid axles
Internal oil bath service brakes

CHASSIS
Heavy duty welded frame
Articulating joint with heavy duty welded radial spherical bearings and large hardened pins
Dual double acting heavy duty welded hydraulic steering cylinders with bushings
Full belly pans and front pull hook
Painted with yellow gloss finish
Operating weight of 70,000-85,000 LB (31,751-38,555 KG)

STANDARD EQUIPMENT
6-inch color display for monitoring and diagnostics
Engine oil and coolant monitoring and warning
Engine coolant monitoring and warning
Voltage monitoring
Fuel gauge
Tachometer with hour meter
Hand and foot throttle
Low hydraulic oil level light / indicator
Transmission oil temperature gauge and warning light
Transmission clutch pressure gauge and warning
Oil filter service warning light / indicator

ELECTRICAL
(4) 12 VDC, 950 CCA batteries
12-Volt DC engine system, 200-Amp alternator
12-Volt DC roadway, turning, and warning lights
Master disconnect switch
Horn
Four adjustable LED headlights in hood
Two adjustable front and two rear/side LED work lights
Two adjustable LED work lights in rear bumper
Brake and indicator lights in rear bumper with warning lights on top of cab viewable front and rear
7-pin electrical trailer connector and relays
Strobe light

OPERATOR'S STATION
A/C cab with rear windshield wiper which tilts for transmission and hydraulic component service. Includes AM/FM radio, marine grade, with USB, AUX port and Bluetooth
Electric hydraulic tilting platform for transmission and hydraulic component service
Leather, heated/ventilated, toggle link, semi-active suspension with fully adjustable air ride, backrest, lumbar, head and arm rests seat, 60-degree swivel right
Optional:
Training seat

HYDRAULIC SYSTEM
Open center pump for brakes, steering
Priority hydraulic powered steering
91-gal pressurized hydraulic tank with 100% filtration via full flow spin-on canister type filters (91-gal capacity/80-gal oil) and 12-inch clean out door
Load sense pump with 3 proportional electrically controlled closed center valves
Accumulator for emergency braking
Hydraulic brake ports on rear for trailer

MISC OPTIONS
Less standard 3 ban control valve if valves on scraper
6 proportional switches with controller for valves on scraper without valve on tractor
6 proportional switches, controller with load sense, closed center 6 bank valve
9 proportional switches with dual controllers for valves on scraper without valve on tractor
9 proportional switches, dual controllers with load sense, closed center 9 bank valve
Category IV 3 point hitch
Category IV 3 point hitch with float and draft assist via variable hydraulic cylinder control in up or down direction
Front push bumper
Heavy duty drawbar
Heavy duty scraper drawbar (multiple types available)
Fire extinguisher

TIRES
(8) 710/70R42, R-1W or R1
Heavy duty flange mounted dual one piece rims
Rim design allows for removal of outer tire/rim assembly without removing inner tire/rim assembly
OPTIONAL:
(8) LSW710/60R46, R-1W
(8) LSW800/55R46, R-1W